Using ALU-Clip for the most popular aluminum profiles on the market will give you a high quality product that will delight you. With 16 different ALU-Clip types available, up to 150 different standard profiles can be clipped.
You can get the ALU clip profiles for the standard of Bosch, ITEM, Paletti, Metra, etc., an adaptation to other system profiles is also possible.
Assembly of the ALU-Clip system
The assembly of our ALU-Clip system is very simple, first the selection of the aluminum profile must match our ALU-Clip system.
>) The clip is pushed into the plastic profile.
(See picture 1, 2, 3)
>) The other clips (5 pieces / meter) are evenly distributed.
>) Then the plastic profile with the inserted clip
pressed into the aluminum profile. (See picture 4)
4.) By levering the plastic profile up or to the side
the clips are blown off if the profile is misplaced. Neither the plastic nor the aluminum profile will be damaged. (See picture 5)
